Features and Performance
Fluorescence Intensity: < 2 fmol fluorescein/well
Luminescence: < 1 amol ATP/well
LSC: Eff. 45% / 3 H, 90% / 14 C and 90% / 125 I
TRF: < 100 amol Eu/well
FP: 5 mP stdev at 1 nM fluorescein
Abs: Dynamic range 3.0 OD
Modes: Multiple wavelength, end-point and kinetic
Plate types: 1 – 384 well SBS standard plates.
Scanning: > 100 points/well
Shaking: Integrated shaker
Excitation wl. range: 190 nm to 1000 nm
Emission wl. range: 360 nm to 630 nm (700 nm)
Absorbance wl. range: 230 nm to 900 nm.
Light source: Xenon flash lamp
Detectors: PMT and Si-photodiode with patented detector alignment optimization for highest performance in each mode.
Filters: Up to 20 pre-programmable excitation, absorbance, emission and luminescence filters.
Operation: Stand-alone or Windows based MikroWin SW
Size: 27 kg; 37 cm(w), 40 cm(d), 30 cm(h)

Options
Injectors: Up to 2
Temperature control: Ambient +2 ° C - 42 ° C

Stacker and Robot compatibilityModels
425-105 Multi-technology reader
425-129 LSC-FI-TRF-FP-Lum reader
425-155 FI-TRF-FP-Abs-Lum reader
425-187 Lum-LSC-Abs reader
425-145 Lum-LSC reader

The AMPLICHRON ®- system guarantees a constant amplitude independently from changing conditions within the sample. It ensures reproducible results for process validation. Settings within a range of 10 to 100 %. Verifi cation of actual value at the display.
Permanent control of ultrasound irradiation as well as indication of wear of the probe.

Pulsation
permits heat dissipation when processing sen si tive samples.
The adjustable pul sa tion allows cooling during rest intervals.

Built-in timer
Process duration storable. Indication of elapsed time in continuous operation or remaining time in countdown mode.

Amplitude control or alternatively power control
• Pulsation: operation intervals from 0,1 s up to 600 s, rest intervals from 0,2 s up to 600 s
• Timer up to 9 h: 59 min: 59 s
• Display of energy (kJ) delivered to the sample
• 9 user programs
• Monitoring of allowed probes
• Automatic amplitude limiting after preselection of probe
• Indication of temperature from 0 up to 120 °C,alternatively switching off or warning signal, temperature sensor optionally
• WINPULS remote control f or process organi sation with PC over RS-232 and IR interface
• Lighted LCD display

Automated Beta Counter in a light weight (less than 100 kg) small foot print allowing portablility and lock down facilities (location on ships, theft prevention).

True TDCR Technology for 20 ml, 7 ml vials and eppendorf tubes with counting efficiencies greater than 60% 3H and 14C at greater than 95%.

Software CFR 21 Compliant.

High Performance Gamma Counters for RIA and Research!
• Complete data reduction for all RIA, IRMA, Radio and Research assays
• Selectable dual label counting (count once Fol/B12, l125/Cr51, etc.)
• Automatic calibration for long term stability
• Quality Control storage and plotting via Levey-Jennings charts
• Decay corrected stored curves
• 5 sizes to fit your needs (1,2,3,4 up to 25 detectors)
• Well-type Nal(tl)detectors for maximum efficiency (>80% for l125)
• 4096 channel analyzer for unmatched accuracy and spectral plotting
• Multiple interface ports; Connect to a PC, Mac, Unix/Linux or LIS
• Count high energy isotopes with full crosstalk correction *Cr51,Fe59,etc)
• Self diagnosing of system parameters
• Extremely compact size, less than 18 inches (46cm) wide.
• Very economical